Page 2
Manual Contents Welcome! ______________________________________________________ Congratulations on your purchase of the Miniature Fiber-Optic 3G-SDI Manual Contents Extension module, SDIX-100, SDIX-100C. This manual contains information Welcome!, Product Description that will assist you in installing and operating the product. System Requirements for Setup Installation...
Page 3
System Requirements for Setup Installation Hardware requirements Important: Please follow the installation procedure as below. Improper or no operation may result if the start-up sequence is not correctly followed. You have to have a SDI multimedia systems (Camera, OB Van, Step 1 Broadcasting equipment using SDI signal, SDI Monitor etc.) or Carefully unpack the contents of the shipping group.
Page 4
Note: Both of Tx and Rx modules of SDIX-100(C) must be connected by Opticis. +5V power adaptors. Technical Support and Service For commercial or general product support, contact your reseller. For technical service, contact Opticis by email techsupp@opticis.com or visit its website at www.opticis.com. Figure 5 – Whole Connection of SDIX-100(C) Step 7 If the system does not work properly, go to page 1-5, trouble shooting.
Page 5
Transmission of multi-rate SDI digital video over one (1) fiber: period of one (1) year from the date of purchase from Opticis or its authorized It converts and transmit one (1) channel of SMPTE-424M (3G-SDI), resellers.
Page 6
7F, 166, Jeongjail-ro, Bundang-gu, Seongnam-si, Gyunggi-do, 13558 South Korea Tel: +82 (31) 719-8033 Fax: +82 (31) 719-8032 www.opticis.com For order support, please contact your Distributor or Reseller. For technical support, check with the Opticis web site www.opticis.com or contact techsupp@opticis.com...
Need help?
Do you have a question about the SDIX-100, SDIX-100C and is the answer not in the manual?
Questions and answers