Vcr Connections - Philips PR0930X1 Owner's Manual

H U
OOKING
VCR TV
TO
B C Antenna or Cable signal to
ASIC ONNECTION
the IN FROM ANT(enna)
T he basic Antenna/Cable to
jack on the VCR.
VCR to TV connection is
shown here. If you have a Cable
Box, refer to the VCR owner's
manual for details.
300 to 75Ω
Adaptor
Outdoor
VHF/UHF
Antenna
Cable TV signal
C TV
ABLE
C /C B
ABLE ABLE OX
Cable Box, then you're ready
to connect your Cable TV sig-
Y our Cable TV signal may be
nal to the TV.
a single (75Ω) cable or a
If you have a Cable Box:
Cable Box installation. In either
Connect the Cable TV signal
case, the connection to the TV
to the IN jack on the Cable
is very easy.
Box.
Note to the Cable TV System Installer: This reminder is provided to
call the Cable TV system installer's attention to Article 820-40 of the
National Electrical Code, which provides guidelines for proper grounding - in
particular, specifying that the cable ground shall be connected to the ground-
ing system of the building, as close to the point of cable entry as possible.
Cable TV Company
Cable Box
Y TV (A
P OUR NTENNA
Connect your
cable to the OUT TO
TV jack on the VCR
and to the ANT(enna)
IN jack on the TV.
The coaxial cable may be
supplied with the VCR.
OUT TO TV
IN FROM ANT.
If you do not have a
Cable Box, connect the
Cable TV signal to the
ANT(enna) IN jack on the TV.
If you have a Cable Box:
Use a coaxial cable to connect
the OUT jack of the Cable Box
to the ANT(enna) IN jack on
the TV.
NOTE: The coaxial cable
might be supplied by the Cable
TV company.
Cable TV Signal (75Ω)
OR
Coaxial cable
/C C
ABLE ONNECTIONS
Connect a coaxial
Refer to the VCR
owner's manual for other
possible connections and for
operating details.
Coaxial cable
VCR
If you do not have a
Back of TV
- 3 -
) (C ' )
ONT D
ANT. IN
AC 120V
Back of TV
S
MART
H
ELP
To select
only the channels on
your Cable system,
see Auto Install
(page 5).
If you use a Cable
Box, set the TV to
the same channel as
the CH 3/4 switch
on the back of the
Cable Box and
select channels at
the Cable Box.
ANT. IN
AC 120V