Table of Contents
Advertisement
Quick Links
CONTENTS
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Know Your Grider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Grinding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SPECIFICATIONS
Model #
Motor Type:
Motor Ratings :
Wheel Diameter :
Wheel Thickness :
Arbor Size :
No load Speed :
Wheel Grits :
SP-PB006
Induction
120VAC,2.1A,60Hz,1/3Hp
6"(150mm)
3/4"(20mm)
1/2"(12.7mm)
3450RPM
36(Coarse) / 60(Medium)
2
2
3
4
5
9
10
11
12
14
Advertisement
Table of Contents
Related Manuals for STEELE PRODUCTS SP-PB006
Summary of Contents for STEELE PRODUCTS SP-PB006
-
Page 1: Specifications
Warranty ..............SPECIFICATIONS Model # SP-PB006 Motor Type: Induction Motor Ratings : 120VAC,2.1A,60Hz,1/3Hp... -
Page 2: Important Safety Rules
Important Safety Rules KNOW YOUR GRINDER DANGER!! Failure to observe any of the following instructions could result in severe personal injury to tool user and bystanders or cause damage to tool and property! WARNING! – Read, understand and observe all instructions in this manual before using or operating the tool for which it is written and supplied. -
Page 3: Operating Instructions
OPERATING INSTRUCTIONS This tool is intended for use on a circuit that has an outlet that looks like the one illustrated. The original tool has a grounding plug that looks like the plug illustrated (Figure 2). Before You Start - Safety Use of Extension Cords •... - Page 4 NOTE: The eye shield should move freely when being adjusted, but stay in place when the locking 3. Drill holes in the workbench at the marks. 4. Using two long bolts, washers, lock-washers and nuts, as shown (not supplied), secure the knob is tightened.
-
Page 5: Features
FEATURES GRINDING Tool Rest Adjustments and Installation • Adjust the tool rest to accommodate large or unusually shaped workpieces. • Always keep the workpiece moving across the face of the grinding wheel. Grinding continuously on the same spot on the wheel will cause grooves to be worn into the wheel. The wheel may crack or become damaged more easily, and grinding of other objects will be difficult. -
Page 6: Grinding
MAINTENANCE TROUBLESHOOTING Service on these tools should only be performed by an authorized, qualified technician. Maintenance Required Frequency 1. Check power cord Before each use. 2. Check wheels for cracks Before each use. 3. Check moving parts for alignment and binding issues Before each use. -
Page 7: Maintenance
Steele® warrants to the original purchaser who uses the product in a consumer application (personal, Wavy condition on 1. Machine vibrating. 1. Ensure machine is securely mounted residential or household usage) that all products covered under this warranty are free from defects in surface of workpiece. -
Page 8: Warranty
Merchandise sold by Steele® which has been manufactured by and identified as the product of another company, such as gasoline engines. The product manufacturer’s warranty, if any, will apply. ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECTS, FAILURE OR MALFUNCTION OF THE PRODUCT IS NOT COVERED BY THIS WARRANTY.
Need help?
Do you have a question about the SP-PB006 and is the answer not in the manual?
Questions and answers
Can i get a wiring diagram? Someone took it apart and i need to rewire it.