Download Print this page

iLumin TSC-30 Installation Manual

Color touchscreen

Advertisement

Quick Links

Introduction
Welcome
The iLumin TSC-30 Color Touchscreen from Cooper
Controls delivers the smartest and most flexible room
control solution available. Operation centers upon the
3.5" color LCD screen which occupies a full two thirds
of the faceplate. All displayed graphics and touch re-
sponses are fully programmable, which means that the
TSC-30 can meet all of your current requirements and
also be easily altered at any time in the future. All control
signals are transmitted to the source controller(s) using
robust iCANnet connections.
Model numbers
The TSC-30 Color Touchscreen is available in the
following variants:
TSC-30-W-NA
3.5"Color Touchscreen, White
TSC-30-B-NA
3.5"Color Touchscreen, Black
TSC-30-G-NA
3.5"Color Touchscreen, Gray
TSC-30-V-NA
3.5"Color Touchscreen, Ivory
Ambient atmosphere requirements
Temperature
32
F to 104
0
Humidity
0 to 95% non-condensing
Dimensions
0.49 in.
(12.5 mm)
3.39 in.
(86 mm)
1.69 in.
(43 mm)
 Touchscreen main body
TSC-30 Color Touchscreen
Installation guide
F (0
C to +40
C)
0
0
0
5.75 in.
(146 mm)
0.49 in.
(12.5 mm)
Supplied parts
Main body
Front cover
Power adapter
0.27 in.
(7 mm)
1.06 in.
(27 mm)
2.64 in.
(67 mm)
3.66 in.
(93 mm)
Power adapter Ü
Wallbox
Mounting
screw x 2
1.77 in.
0.98 in.
(45 mm)
(25 mm)
0.2 in.
(5 mm)
0.21 in.
(5.5 mm)

Advertisement

loading

Summary of Contents for iLumin TSC-30

  • Page 1 All displayed graphics and touch re- Front cover sponses are fully programmable, which means that the TSC-30 can meet all of your current requirements and also be easily altered at any time in the future. All control signals are transmitted to the source controller(s) using robust iCANnet connections.
  • Page 2 Disassembling the touchscreen Fixing to a wallbox 1. At either side of the front cover, locate two small The TSC-30 Color Touchscreen is supplied with a suit- recesses. Carefully insert a small flatblade able double gang wallbox. screwdriver into a recess and twist to prise...
  • Page 3 ?? AWG (1.5mm ) to minimize the voltage drop. Ensure that The TSC-30 Color Touchscreen is supplied with a ter- the total length of cable from the power adapter to the mination resistor as standard. If the touchscreen is not touchscreen does not exceed ?? feet (?? m).
  • Page 4 In addition to the power and iCANnet connections 1. With the main body fixed to the wallbox, carefully located at the rear of the unit, the TSC-30 Color Touch- place on the front cover until it clicks into place. screen also provides two sockets at its front panel.

This manual is also suitable for:

Tsc-30-g-naTsc-30-w-naTsc-30-v-naTsc-30-b-na