Checklist, Maintenance, And Pre-Dive Inspections - Kirby Morgan SuperLite 17B Maintenance Manual

Loc. # Part #
146 530-308
149 530-032
152b 530-019
163 555-178
— 200-017
— 530-210
— 555-210
Note on Torque Specifications
Note 1: Use Teflon tape for one to one and a half wraps, starting two threads back from the pipe thread end
®
of the fitting to avoid getting Teflon
* For a neoprene neck dam, turn the screw three turns. Screws may need adjustment after several dives.
Use thread locking compound Loctite
†

Checklist, Maintenance, and Pre-Dive Inspections

For the most current check lists, helmet maintenance procedures, and pre-dive inspections, please check on
the Internet at www.divelab.com.
© ⅯⅯⅩⅢ Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 130311001
Description
Nut, communications posts
Screw, main exhaust body
Screw, Quad Exhaust
Packing nut, waterproof connector
Overpressure Relief Valve
Weld Lens Mount Bolt
Restrictor Adaptor
tape in the valve. Tighten pipe thread using good engineering practices.
®
222 or equivalent, medium strength only.
®
Torque in Inch
Pounds Newton Meters
Snug—DO NOT overtighten
RTV Sealant
12
12
20
20
23
20
SuperLite® 17B
Torque in
1.3
1.3
2.25
2.25
2.6
2.25
161