Adjusting The Door Springs; Fitting The Plinth - Rangemaster RDW6015FI User Manual & Installation & Service Instructions

Rangemaster dishwasher user guide

Table of Contents

Enlarged version

Fig.5-12

ArtNo.800-0114 - Securing the dishwasher

Fig.5-13

��

ArtNo.800-0114 - Securing the dishwasher

��

Fig.5-14

ArtNo.800-0119 - Adjusting the door springs

Fig.5-15

Securing the Dishwasher

Using the two screws supplied, secure the dishwasher to the

underside of the worktop (Fig.5-12).

For non-wooden worktops (e.g. marble) two brackets are

provided to allow the appliance to be secured to the sides

of the adjacent cabinets. Secure the appliance using the

two screws at the top of the chassis (Fig.5-13); adjust to the

correct width and then screw to the adjacent side panels

using suitable screws.

Adjusting the Door Springs

The door balance can be adjusted via two nuts accessed

through the two holes in the top of the front frame

(Fig.5-14). Using the tool supplied, adjust these until the

door remains just open under its own weight and is level

when open.

Cut clearance in the plinth to allow the door to fully open and

��

seal edges with a suitable silicon sealant to prevent water

ingress (Fig.5-15).

��

Table of Contents

Show Quick Links

Table of Contents