Buttons - Brannan DT-8835 User Manual

InfraRed Thermometer User Manual

9.Buttons

1-Up button
(for EMS,HAL,LAL)
2-MODE button
(for cycling through the mode loop)
3-Down button
(for EMS,HAL,LAL,LOG)
4-Laser/Backlight on/off button
(pull trigger and press button
to activate laser/backlight)
MODE Button Function
•The infrared thermometer measures Maximum
(MAX), Minimum(MIN), Differential(DIF), and
Average(AVG) Temp. Each time you take a reading.
This data is stored and can be recalled with the
" MODE " button until a new measurement is taken.
When the trigger is pulled again, the unit will
begin measuring in the last mode selected.
•Pressing the " MODE
access the High
•Alarm(HAL), Low Alarm(LAL),Emissivity(EMS) and
data logger(LOG).Each time you press
•MODE, you advance through the mode cycle.
•Pressing the " MODE
access the Type kTemp. Measurement.
•The diagram shows the sequence of functions in
the MODE cycle.
8
" button also allows you to
" button also allows you to
1
2
EMS
MAX
MIN
DIF
AVG MODE
HAL
LAL
TK
LOG
3
4