NETGEAR RangeMax WNR834B User Manual page 63

From the main menu of the browser interface, under Advanced, click Static Routes to view the
Static Routes menu.
Figure 5-4
To add or edit a static route:
1. Click Add to open the Add Static Routes menu.
Figure 5-5
2. In the Route Name box, type a name for this static route.
(This is for identification purposes only.)
3. Select the Private checkbox if you want to limit access to the LAN only.
If Private, the static route will not be reported in RIP.
4. Select the Active checkbox to make this route effective.
5. Type the Destination IP Address of the final destination.
6. Type the IP Subnet Mask for this destination.
If the destination is a single host, type 255.255.255.255.
Customizing Your Network Settings
NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual
v1.2, January 2007
5-9