Summary of Contents for INTELLI HEAT HALM-FL-LCD 4
Page 1
Roma Classic Thermodynamic Fluid Filled Aluminium Electric Radiator User Manual HALM-FL- LCD Serie Please read this manual carefully before use...
IMPORTANT SAFEGUARDS When using an electrical appliance, basic safety precautions should always be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING WARNING: To reduce the risk of fire, electrical shock, or injury to person: 1. The product is for household use only. 2.
INSTALLATION Used as wall-mounted: Drill holes on the wall according to the picture. Warning: Be sure to keep the distance between the heater and floor, wall and so on accordingly. Fit the fasten tube in the holes. Fit the up-hook on the wall with screws. Hang the unit on the up-hook.
INSTRUCTIONS FOR USE Warning: Before using the heater make sure that it is mounted tightly on the wall. Damage may occur if it is placed on an incline or decline. The control system is with following functions: 1. With digital LCD to let you know the working situation of the unit. 2.
Rationale: There are 3 running modes: free , daily and weekly Free use mode( ): It will include normal mode and timer mode Daily mode( ): There are total 9 daily programs. Every program is combined with working modes: comfort( , economic( )and anti-frost( and empty).
Page 7
2-1-2. Temperature setting: Press to set the target temperature directly and at this moment the temperature starts to twinkle. Press to set the target temperature. Temperature adjustable range is from 10 ℃ ~ 35 ℃. (Note: If press without releasing, you can achieve rapid increasing or decreasing;...
Page 8
2-3. Day program Day program has three kinds of working modes: Comfort mode :( program content displayed ), adjustable range from 10 ℃ ~ 35 ℃; Economic mode: ( program content displayed ), adjustable range of 10 ℃ ~ 35 ℃; the temperature should no higher than comfortable temperature;...
Page 9
2-3-2. Temperature settin g: Long-press (3 seconds) until twinkle, at the same time the original comfort temperature start to twinkle. Press to set the target comfort temperature. Press to confirm, and start to twinkle, the original economic temperature also starts to twinkle.
Page 10
2-4-1.Time setting Same as 2-1-1, then the unit will automatically adjust to the current time and running accordingly. 2-4-2.Temperature setting: Same as 2-3-2 2-4-3. Setting weekly program : Long-press (3 seconds) to enter weekly program setting, the time and working mode are no longer displayed, showed ( displayed until the setting finished, the unit stopped heating during the setting), Monday marking begin to twinkle, program name of Monday...
Page 11
Note: Press to power on, the unit would come back to factory pre-setting. 4. Other notes : (1) The screen is with back light. It will extinguish after 1 minute if you didn’t press any button. It will light up if you press any button. (2) Unit is with button lock function.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Intelli Heat Ltd, Unit 18 Napier Place, Stephenson Way, Thetford, Norfolk IP24 3RL T: 0845 163 0055 F: 0845 163 0045 E: info@intelligentheat.co.uk...
Need help?
Do you have a question about the HALM-FL-LCD 4 and is the answer not in the manual?
Questions and answers