Skipping of Stitches:
Push the bulb up in the socket, turn it
ight and let it snap into position.
Cause:
The bulb is now firmly secured.
Needle rrnlNolerly inserted.
Wro
eedle used.
Needle bent.
Mach ne not pr opnr ly tb
irirc1
Needle either too thm or too finch for
the thread used.
4O
41
Remedy:
Needle must be pushed up to the stop,
with the long groove facing left.
The correct needle system is stamped on
the bed plate slide. Use needles, System
705 R, in this mach ne only.
Insert a new needle.
Check and correct threciclirrq in uar
dance with Section 10.
Select needle in accordance with the
Chart on page 11
Insert a fresh bulb so that the guiding
pins will slide into the slots of the socket.
24. How to Remedy Sewing Troubles
Photo 37
1
--
1; :
I
I
I
I
11
I
4
[.
[L
r