Whirlpool HB10813 Operation Manuals page 17

If it is difficult to pull out the filter, please open the front cover to take out the filter:
1. Open the front cover by
holding the two sides of front
cover.
Safety Items:
Do not put your hands into the machine when running, to avoid from injury or
burn by the heater.
Do not spray water into the main body, which may damage the motor, or cause
electric shock by the electricity leakage.
In order to avoid from any accident or injury, if any of the following symptoms and
abnormal situation occur, please switch off the electricity and ask qualified
electrical engineering contractor for repair or check. (Self repair by user is strictly
prohibited to avoid danger).
Turn on the power, the fan does not start.
The power on and off.
Abnormal sound and vibration during operation.
Plastic smell or other abnormal smell occurs.
General Failure Treatment:
Phenomenon
No operate when the power
turning on
The display light does not display
conforming to the function
Abnormal noise
The remote control does not
work
2. Pull out the Pre-filter.
Check
No power supply
The light of the Power
does not light on
The machine does not
receive remote control
signal
Filter blocking
Low battery
- 16 -
3. Close the front cover and also
press the upper left & right
corners to close it completely.
Solution
Switch on the power
Ask the qualified engineer
for repair
Align the remote to the
machine or control the
remote in the receiving
range
Clean the filter or replace
with a new filter
Change the battery