Clear All Records; Maintenance - Carlyle DAMM User Manual

CLEAR ALL RECORDS

To access the record clear-all menu
•
Press twice to delete the all record data.
•
( will be shown)
If press once,
•
want to abandon, just press to skip this menu.
Continuously pressing will skip the setup
•
menu and go back to the current target angle
screen.

MAINTENANCE

ATTENTION:
One-year periodic recalibration is necessary to
maintain accuracy.
Please contact your local dealer for calibration.
CAUTION
1. Do not shake violently or drop meter.
2. Do not leave this meter in any place exposed to
excessive heat, humidity, or direct sunlight.
3. Do not use this apparatus in water. It is not
waterproof.
4. If the meter gets wet, wipe it with a dry towel as
soon as possible. The salt in seawater can be
especially damaging.
5. Do not use organic solvents such as alcohol or
paint thinner when cleaning the meter.
6. Keep this meter away from magnets.
7. Do not expose this meter to dust or sand as
this could cause serious damage.
8. Do not apply excessive force to the LCD panel.
STORAGE
1. When the wrench is not used for an extended
period of time, remove the battery.
2. Keep a spare battery on hand when going on a
long trip or to cold areas.
3. Do not mix battery types or combine used
batteries with new ones.
4. Sweat, oil and water can prevent a battery's
terminal from making electrical contact. To avoid
this, wipe both terminals before loading a battery.
5. Dispose of batteries in a designated disposal
area. Do not throw batteries into a fire.
DAMM
will be shown. If you
9
Abandon
Rev. 02/17/12