Advertisement
The Eastwood Digital Tire Pressure
Gauge/Inflator is engineered and
built to provide rugged reliability with
a high degree of accuracy. Precise
pressure readout in increments of
0.1 psi deliver the close tolerances
required in racing applications.
The full rubber encapsulation
provides shock-proof protection
and comfortable ergonomics.
SAFETY INFORMATION
READ INSTRUCTIONS!
CAUTION!
• Do not exceed 100 psi [6.9 bar] or permanent damage to the unit
• Do not exceed the rated inflation pressure of a tire or violent explosion
• Do not use to inflate dry-rotted or damaged tires or violent explosion
CAUTION!
•
•
•
SPECIFICATIONS
• Pressure Range = 0 to 100 psi [0 to 6.9 bar]
• Available units of measure = psi, bar, kpa & kg/cm2
• Readout Resolution = 0.1 psi
• Accuracy = +- 1%
• Temperature Range = 32°– 104° F [0° – 40° C]
• Battery Requirements = (2) CR2032 (included)
• Air Inlet = 1/4" FNPT
2
Thoroughly read and understand this instruction manual before use. Save manual
for future reference to safety warnings, maintenance and operating procedures.
Failure to follow all warnings can result in tool damage or serious physical injury.
will occur.
could occur resulting in serious injury or death.
could occur resulting in serious injury or death.
Keep the Inflator dry. Exposure to moisture can damage the precision
electronics inside.
Keep the Inflator away from electromagnetic interferences and fields.
Avoid dropping or bumping the Inflator.
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com
Advertisement
