7. REPLACEMENT OF LAMP, LAMP CAP AND LAMP COVER
Turn the switch off and remove the battery before replacement (Fig. 2).
7-1. Replacement of the Lamp
(1) Remove the Lamp Cover [1] by tuning it counterclockwise in C direction (Fig. 3).
(2) Remove the Lamp Cap [2] and the Reflector Sheet [5] at the tip of the Lamp [3] and pull out
the Lamp [3] (Fig. 1).
(3) Securely insert the new Lamp [3] and reinstall the Lamp Cap [2] to the tip of the new
Lamp [3] and the Reflector Sheet [5] (Fig. 1).
(4) Reinstall the Lamp Cover [1] by turning it clockwise in D direction without twisting the
Lamp Cap [2]. If the Lamp Cap [2] is twisted, check whether the Lamp [3] is properly
inserted or not again.
* The Lamp Cap [2] is provided at the tip of the Lamp [3] to prevent breakage of the
lamp in case of accidental drop of the Model UB 18DSL. Be sure to reinstall the Lamp
Cap [2] to the new Lamp [3].
7-2. Replacement of the Lamp Cover
(1) Remove the Lamp Cover [1] by tuning it counterclockwise in C direction (Fig. 3).
(2) Install the new Lamp Cover [1] by turning it clockwise in D direction without twisting the
Lamp Cap [2].
7-3. Replacement of the Lamp Cap
(1) Remove the Lamp Cover [1] by tuning it counterclockwise in C direction (Fig. 3).
(2) Remove the Lamp Cap [2] from the tip of the Lamp [3] and install the new Lamp Cap [2] to
the tip of the Lamp [3].
(3) Install the new Lamp Cover [1] by turning it clockwise in D direction without twisting the
Lamp Cap [2].
-6-