Trust BT220 Manual

BT220 HEADSET
Product information
1 Charge connection
2 "+" button
3 "-" button
4 Function indicator (blue)
5 Battery indicator (red)
Installation
1
FULLY charge before use! 2 ~ 4 hours.
Activate the pairing mode: press '+' button for 8 seconds
2
alternately
To make a telephone call: activate Bluetooth and search for Bluetooth devices (the headset must still
3
be flashing for it to be detectable).
4 Bluetooth device(s) found: select "Trust BT220".
PIN code = 1234. It may be possible to enter or alter the name of the headset.
5
Press Connect.
6
Place the headset on your ear (either the left or right ear).
7 To answer an incoming call: press the "+" button.
8 Adjust the volume. Other functions: see the table.
9
To end a telephone call: press the "-" button for 3 seconds.
General method for pairing the headset with another Bluetooth (BT) device
Headset
1. Activate the pairing mode:
2.
3.
4.
5.
6.
7. (Sometimes you will have to press the "+" button to activate the connection.)
8. To disconnect: press the "+" button for 3 sec.
6 Ear plug
7 Microphone
8 Ear clip
9 Charge indicator (red)
10 Power indicator (green)
Batteries full: red charge indicator (9) will go out.
blue + red indicators will flash
Other Bluetooth device
(Press "+" button for 8 sec.)
Search for new BT devices.
Headset found.
Select/activate the headset.
Enter the PIN code (1234).
The connection will be created.
1
UK