Assembly And Use; Non-Portable Use - BONSAI VELOCITY OM-812 Product Information And Instructions

ASSEMBLY AND USE

• Make certain that your hands are free of oil, grease, and other contaminants.
• Inspect the unit to ensure that it has the appropriate viton (or equivalent)
seal washer (gasket), in good working condition, attached to the inlet nozzle.
• Secure the cylinder in an upright position.
• Inspect the valve of the cylinder and the BONSAI
are free of contaminants� If any indication of damage or contamination is
detected, DO NOT use the equipment and contact your Home Care Provider�
WARNING! Use ONLY a manufacturer-specified seal washer (gasket).
An incorrect seal washer (gasket) may not be oxygen compatible or may cause
an oxygen leak, creating an increased fire risk. DO NOT use the device if the
manufacturer-specified seal washer (gasket) is missing.

NON-PORTABLE USE:

The BONSAI VELOCITY conserver is designed to extend the life of portable oxygen
®
supplies when away from the primary source� While the BONSAI
may be used with stationary oxygen sources, the unit should be used only while awake
and reasonably attentive� The BONSAI
while asleep because, in the unlikely event of operational malfunction or dislodging of the
cannula, the user could be unaware and not make the necessary corrections.
VELOCITY conserver to ensure they
®
VELOCITY conserver is not intended for use
®
VELOCITY conserver
®
8