Specifications - Extech Instruments WB200 User Manual

Specifications

LCD Display
LED status indicator
Audible Alert
Response time
Temperature Units
Measurement ranges
Resolution
Accuracy
Datalogger memory
Datalogging sample rate
Over range indication
Under range indication
Low battery indication
Water tank capacity
Power supply
LCD Dimensions
Meter Dimensions
Weight
All rights reserved including the right of reproduction in whole or in part in any form
Shop for Extech products at:
7-segment digit type for readings and messages
Function icons above and below reading for units and mode status
Low battery indication
Flashes red in an Alarm condition
Flashes green when a reading is logged
Sounds intermittently when in an Alarm condition
120 second update rate
Switchable Temperature units (
Temperature (air, wet bulb, dew point): 5 to 50
Relative Humidity: 0.0 to 99.9%
o
0.1 C/F (air, dew point, and wet bulb temperature)
0.1% Relative Humidity
RH: ± 3% (10 to 90%RH @ 25
Air, Dew Point, and Wet Bulb Temperature: ± 0.6
Up to 100 reading sets (each set includes one measurement from each
of the four measurement modes). Recall readings directly on the
meter's LCD display. The internal memory is non-volatile.
Programmable from 15 minutes to 60 minutes in 5 minute increments
"E3" appears on the LCD
"E2" appears on the LCD
Empty battery symbol appears on the LCD (
120ml (4 oz.)
Four (4) 1.5V 'AAA' batteries or 5V universal power adaptor (included)
24 (H) x 40 (W) mm / (0.94 x 1.58'')
70.8 (top cover) x 77.6 (bottom cover) x 177 (H) mm / (2.8 x 3.1 x 7.0'')
250g (8.0 oz.) with batteries installed
Copyright © 2013 FLIR Systems, Inc.
ISO-9001 Certified
www.extech.com
10
ShopExtech
o o
C/ F)
o
C (41 to 122
o
C; ± 5% outside of this range)
o
C (1
)
WB200-EU-EN V1.4 8/13
1.888.610.7664
.com
o
F)
o
F)