Advertisement
HaNaU
BUNseN BURNeR
Read all instructions before using the Touch-O-Matic
Save these instructions for future reference.
The Touch-O-Matic
can operate on five types of gas: butane, propane, natural gas,
mixed gas or manufactured gas, depending on the nozzle installed
in the Touch-O-Matic
used for a wide variety of lab applications. The pilot light makes it
convenient for intermittent use.
TOUCH-O-MaTIC
™
bunsen burner is a gas burner. The burner
®
bunsen burner. The Touch-O-Matic
®
®
.
®
can be
®
Advertisement
Table of Contents
Related Manuals for Hanau Touch-O-Matic
Summary of Contents for Hanau Touch-O-Matic
- Page 1 HaNaU TOUCH-O-MaTIC ™ ® BUNseN BURNeR Read all instructions before using the Touch-O-Matic ® Save these instructions for future reference. The Touch-O-Matic bunsen burner is a gas burner. The burner ® can operate on five types of gas: butane, propane, natural gas,...
-
Page 2: Important Safety Information
Important safety Information Warning DO NOT USe AROUND FLAMMABLe MATeRIALS. WARNING Misuse of the burner can cause an explosion or fire and result in burns and property damage. DO NOT USe FUeL OTHeR THAN THe ONe SPeCI- FIeD ON THe LABeL AND NOzzLe. Use with an improper fuel may cause dangerous operation. - Page 3 . Slip the Pilot Light Shield to protect the Pilot Light flame from accidentally being blown out by air movement. Pilot Light Figure 1: Touch-O-Matic ® adjustment 1 Pilot Shield 8 Gas Adjustment Thumbscrew (needle valve) 2 Pilot Light Turn on the gas supply and...
-
Page 4: Care And Cleaning
Operation Turn on the gas and light the Pilot Light and adjust the air-gas mixture as directed above. Operate with an intermittent or continuous flame as directed below. Intermittent Flame Locate the small dot, Intermittent/Continuous Flame Indicator , on the ON-OFF Platform . - Page 5 If leakage continues after securely tightening the Gas Nozzle , or if the burner flame fails to shut off automatically when ON-OFF Platform is released, return the Touch-O-Matic bunsen burner to Whip Mix for repair. ® Use of Waxing Cup and...
- Page 6 Gas Conversion Should you desire to operate your Touch-O-Matic bunsen burner on a gas source ® other than the one identified on the body of the Touch-O-Matic burner and the ® Gas Nozzle , order and install a replacement nozzle. The Gas Nozzles available are: “BUT”...
Need help?
Do you have a question about the Touch-O-Matic and is the answer not in the manual?
Questions and answers