Do you have a question about the TOUCH-O-MATIC and is the answer not in the manual?
Questions and answers
Summary of Contents for Hanau TOUCH-O-MATIC
Page 1
HANAU TOUCH-O-MATIC ™ ® BUNSEN BURNER Read all instructions before using the Touch-O-Matic ® Save these instructions for future reference. The Touch-O-Matic bunsen burner is a gas burner. The ® burner can operate on four types of gas: butane, propane,...
KEEP ALERT FOR THE SMELL OF GAS WHEN THE BURNER IS USED. Do not oper- ate the burner if parts are missing or the unit has been damaged. If Touch-O-Matic ® is dropped, check it carefully for cracks or other damage. Be alert for any improper operation.
Page 3
Pilot Light Shield to protect the Pilot Light flame from accidentally being blown out by air movement. 2. Pilot Light Adjustment Figure 1: Touch-O-Matic ® Turn on the gas supply and 1 Pilot Shield 8 Gas Adjustment Thumbscrew light the Pilot Light...
4. Operation Turn on the gas and light the Pilot Light and adjust the air-gas mixture as directed above. Operate with an intermittent or continuous flame as directed below. Intermittent Flame Locate the small dot, Intermittent/Continuous Flame Indicator , on the ON-OFF Platform .
Page 5
8. Gas Conversion Should you desire to operate your Touch-O-Matic bunsen burner on a gas source ® other than the one identified on the body of the Touch-O-Matic burner and the ® Gas Nozzle , order and install a replacement nozzle. The Gas Nozzles available...
Need help?
Do you have a question about the TOUCH-O-MATIC and is the answer not in the manual?
Questions and answers