Advertisement
ATTENTION:
1、Check the correct cables are being used before operation.
2、After a while the motor will heat up, this is normal.
3、The motor is designed for cold weather but will not work under
-20℃.
4、The colder the temperature the more noise the motor will make.
5、When charging the remote, it automatically restarts. When
charge is complete remove the cable and it will automatically shut
down.
6、High temperature may cause oil coming out, this is normal, use
cleaning cloth.
7、The torque of the motor is automatic depending on the lens
when the NERVE has scanned the lens.
8、If it fails to scan, check LEMO connector and reattach.
9、After switching on and there is no signal to the motor, change
channel and retry, if not restart the power to both the Remote and
receiver.
Advertisement
