Sony LF-X5 Operating Instructions Manual page 18

6
Select [Settings] to the right of [LAN
(DHCP/Manual IP address setting)].
LAN (DHCP/Manual IP address setting)
The [LAN (DHCP/Manual IP address
setting)] window appears.
Verify that values have been assigned for the
IP address, etc.
7
Press [OK].
Connecting via LAN
(manually assigning an
address)
1
Perform steps 3 through 6 of "Connecting
via LAN (DHCP)" on page 17 to display the
[Base station] window.
2
Select [Settings] to the right of [LAN
(DHCP/Manual IP address setting)].
18
3
Refer to the documents provided by your
Internet service provider to input the proper
values for "IP Address," "Subnet mask,"
"Default gateway," "DNS 1," "DNS 2," and
"Host name," and then press [OK].
Remove this check mark.
Input while referring to
OK
documents from your provider.
4
Select [LAN (DHCP/Manual IP address
setting)].
LAN (DHCP/Manual IP address setting)
5
Press [OK].
This sets the "LAN (DHCP/Manual IP
address setting)."
6
Press [Back].
7
Press [Settings] and then [End].