NOTE:
NOTE:
Password on Boot must be set to Enabled to activate the password feature.
F10
5. Press
to save changes and exit
If the verification is OK, the screen will show as follows.
Figure 2-7. Setup Notice
The password setting is complete after the user presses
If the password entered does not match the current password, the screen shows the
Setup Warning dialog.
Figure 2-8. Setup Warning: Invalid Password
If new password and confirm new password strings do not match, the Setup Warning
dialog appears
Figure 2-9. Setup Warning: Passwords Do Not Match
2-10
(Figure
2-8)
(Figure
2-9).
BIOS Setup Utility
.
Enter
.
System Utilities