Makita XLC02 Instruction Manual page 9

Example 4: Prefilter's securing lip is not firmly locked
into groove of cleaner housing
2
► 1. Groove of cleaner housing 2. Prefilter 3. Securing
lip
Reassembly for high performance
filter
Connect high performance filter. At this time, make sure
to twist high performance filter so that securing lip is
firmly locked into cleaner unit.
1
► 1. High performance filter 2. Securing lip
1
► 1. Securing lip
Connect capsule. Align O symbol on capsule with O
symbol on handle and then firmly twist capsule in direc-
tion of arrow until it is secured.
3
1
2
► 1. O Mark
► 1. Handle 2. Capsule
NOTE:
• Always remove dust ahead of time, as suction
power will be reduced if there is too much dust
in cleaner.
• Always be sure to check that high performance
filter is loaded correctly prior to using cleaner. If
they are not loaded correctly, dust will get into
the motor housing, and cause motor failure.
If the following examples occur, high perfor-
mance filter is not loaded correctly. Reload them
correctly to rectify problem.
Problem Examples
Securing lip of high performance filter is not firmly
locked into groove of cleaner housing.
► 1. Securing lip 2. Groove of cleaner housing
9 ENGLISH
1
1
1
2
2