Table of Contents
Advertisement
1. Display Tube Check and KEY Check mode
1. Turn OFF the power.
2. While pressing [DISPLAY] and [MENU] together, turn ON [POWER] .
3. Display tube all lit.
4. Each time the button is pressed, the key number is counted down. After all the 14 buttons are pressed, "OK" appears.
When the [DAB], [FM] or [AM] button is pressed only, the following display appears.
DAB
FM
AM
5. The two eighth notes are moved from the left to the right by turning the [TUNING/SELECT] dial clockwise. The notes are moved from
the right to the left by turning the dial counterclockwise.
2. Entering the Factory Preset (In case perform just to write memory of the Factory Preset.)
1. Turn OFF the power.
2. While pressing [ENTER] and [DAB] together, turn ON [POWER] .
3. Microprocessor Version Display Mode
1. Turn off the power.
2. While pressing [MENU] and [AM] together, turn ON [POWER] .
3. The version and the date of the microprocessor are displayed.
4. Press the [ENTER] button to end this mode.
12
SECTION 2
TEST MODE
Advertisement
Table of Contents
