Jenn-Air 8284756 Installation Instructions Manual page 5

Parts Supplied
Check that all parts are included:
Anti-tip bracket kit
■
A
A. Anti-tip bracket
B. #8-18 x 1" Phillips head screws (4)
NOTE: Anti-tip bracket must be securely mounted to
subfloor. Thickness of flooring may require longer screws
to anchor bracket to subfloor. Longer screws are available
from your local hardware store. See "Install Anti-Tip
Bracket" section.
Gas pressure regulator
■
Burner grates
■
Burner bases and burner caps
■
Griddle drip tray (on griddle models)
■
Conversion Kits:
For models that start with JGRP or JLRP no conversion kits are
supplied. Call service to request one of the following:
LP Conversion Kit P/N W10825584
■
Natural Gas Conversion Kit P/N W10821163
■
NOTE: JLRP is factory set for LP. All other models are factory
set for Natural gas.
B
Parts Needed
All models must be installed with a backguard if installing
■
at zero clearance to a combustible back wall surface such
as drywall. Alternatively, zero clearance to a back wall is
acceptable provided the surface of the entire back wall
above the range and below the hood is covered with a
non-combustible material such as tile or stainless steel.
See "Cabinet Dimensions" in the "Location Requirements"
section for installation requirements.
30" (76.2 cm) Adjustable Backguard
■
Order Part Number 8285148
36" (91.4 cm) Adjustable Backguard
■
Order Part Number 8284756
48" (121.9 cm) Adjustable Backguard
■
Order Part Number 8284755
22" (55.9 cm) Backsplash with Dual-Position Shelf
■
for 30" (76.2 cm) Ranges
Order Part Number W10285447
22" (55.9 cm) Backsplash with Dual-Position Shelf
■
for 36" (91.4 cm) Ranges
Order Part Number W10285448
22" (55.9 cm) Backsplash with Dual-Position Shelf
■
for 48" (121.9 cm) Ranges
Order Part Number W10285449
To order, see the "Assistance or Service" section of the
Use and Care Guide.
Check local codes and consult gas supplier. Check existing gas
supply and electrical supply. See the "Electrical Requirements"
and "Gas Supply Requirements" sections.
It is recommended that all electrical connections be made by
a licensed, qualified electrical installer.
High Altitude Conversion
To convert the cooktop for elevations above 6,560 ft (1999.5 m),
order a High Altitude Conversion Kit.
■ P art Number W10394294 – LP high altitude
■ ■
■ P art Number W10394293 – Natural gas high altitude
■ ■
To order, see the "Assistance or Service" section of the Use
and Care Guide.
5