Philips CED380 User Manual page 10

2
Connect the ISO male connectors and
other wires to the rear panel of the main
unit if necessary.
Caution
•
To avoid an accident, the driver must not watch video
while driving. By design, this system disallows watching
video during drive. Park your car in a safe place and
engage the parking brake before watching video.
Note
•
When the parking brake of your vehicle is not engaged,
the video blocking system is activated. It blocks the
display of front video source only.
•
If the system is not properly connected with the
parking brake control module of your vehicle, video
signals will be blocked by the system, with the below
message displayed on the screen.
Connectors and
sockets on rear
panel
1 SUB-W OUT
(Blue socket)
REAR LINE OUT L
2
(White socket)
REAR LINE OUT R
3
(Red socket)
4 For ISO male
connectors
5 FRONT LINE OUT
L (White connector)
6 FRONT LINE OUT
R (Red connector)
7 Radio antenna
connector
VIDEO IN (Yellow
8
connector)
VIDEO OUT
9
(Yellow connector)
CAMERA IN
10
(Yellow connector)
11 AUDIO IN (White
connector)
AUDIO IN (Red
12
connector)
13 Orange wire
14 Pink wire
15 Purple wire
Tip
•
The pin arrangement for the ISO connectors depends
on the type of your vehicle. To avoid damage to the
system, connect properly.
External sockets or
connectors
Input socket of a
sub-woofer
Rear left speaker
Rear right speaker
As indicated in
step 1
Front left speaker
Front right speaker
Radio antenna
Video output socket
of an external
player
Video input socket
of an external
display device
Video output socket
of an external
camera
Left audio channel
output socket of an
external player
Right audio channel
output socket of an
external player
Reverse camera
(B+)
Parking brake (-)
OE SWC remote in
EN 9