Haier HSU-09LEK13/R2 Operation Manuals page 5

Operation
Sleep Operation
Before going to bed,you can simply press the SLEEP
button and unit will operate in SLEEP mode and bring
you a sound sleep.
Operation Mode
1. In COOL,DRY mode
1 hours after SLEEP mode starts,temp.will become
higher than temp.setting.After another 1 hours,temp.rises
by 1 O C futher.The unit will run for further 6 hours then stops
emp. is higher than temp.setting so that room temperature
T
won't be too low for your sleep.
SLEEP operation starts
1 hr
Rises 1
1 hr
Temp.setting
In COOL, DRY mode
2. In AUTO mode
The unit operaters in corresponding sleep mode
adapted to the automatically selected operation mode.
3. In FAN mode
It has no SLEEP function.
4.Set the wind speed change when sleeping
If the wind speed is high or middle before setting for the
sleep, set for lowing the wind speed after sleeping.
If it is low wind, no change.
O
1 C
SLEEP operation stops
Approx.6hrs
O
Rises 1 C
O
C
Unit stop
Note
When TIMER function is set, the sleeping function can't be
set up .After the sleeping function is set up
TIMER function, the sleeping function will be cancelled; the
machine will be in the state of timing-on.
TURBO/QUIET Operation
TURBO /QUIET
TURBO /QUIET
When you need fast cool or fast dehumidification,you can
choose the Turob function; when you sleep, read, you can
choose Quiet function
Press the bu on, you can switch the "Turbo" and "Quiet"
TURBO /QUIET
will swith as below
（TURBO）
When running in Turbo，the fan speed is the highest,
when running in Quiet, the fan speed is super slow
HEALTH Operation
Nano-Aqua generator adopt two high voltage
pole to ionize the water molecule into
nanometer water ion,and release these ions
to the air to kill the bacterium and refresh
the air. as well as the nanometer water inon
can be easily absorbed by skin,keeping moisture
anytime.
,
if user resets
cancel
（QUIET）
3