Download Print this page

HornBlasters AH-K3 Installation Manual

Nathan airchime k3 train horn

Advertisement

Quick Links

HORNBLASTERS
Nathan AirChime K3 Train Horn Kit Installation Manual

Advertisement

loading

Summary of Contents for HornBlasters AH-K3

  • Page 1 HORNBLASTERS Nathan AirChime K3 Train Horn Kit Installation Manual...
  • Page 2 HornBlasters Support Line: +1 (813) 783-8058 Fax Line: +1 (813) 783-2407 support@hornblasters.com www.hornblasters.com/support K3 Train Horn Kit Installation Guide Before Getting Started Read over the entire instruction guide before you begin your installation. Kit Contents: • Nathan AirChime K3 Train Horn •...
  • Page 3 Installing Your Train Horn Kit Planning Your Installation This is the most important step in your installation. • Plan out the location of each component before starting your installation. • Make sure you have enough air line and wire to install the system before beginning the installation. •...
  • Page 4 III. Installing Your Air Tank Locate a secure area close to your air compressor to mount your air tank. The leader hose of the compressor should be able to reach an available port on the air tank with some slack. 1.
  • Page 5 V. Wiring Your Valve & Air Compressor Your train horn kit will use two completely independent circuits. One circuit will connect your horn trigger (push- button intermittent switch, or toggled factory button) to your electric solenoid valve. The other circuit will connect your accessory trigger (ignition wire, accessory wire) to your air source kit.
  • Page 6: Troubleshooting

    Maintenance & Tips Disconnect electrical components and drain your air system before performing maintenance. General Air Horn System Maintenance • Your Nathan AirChime K-Series horns require very little maintenance. After years of use, however, they may need to be rebuilt. Rebuilding these horns requires installing new diaphragms, O-rings and deep cleaning.
  • Page 7 • Please submit clean, concise photographs. Make sure your subject is clearly visible and in focus. • You may submit any digital image format either via email at media@hornblasters.com, or via digital media (CD, DVD, etc). • Make sure to include some kind of personal information with your submission. We would love to be able to contact you and thank you.
  • Page 8 Ground (Black) Port Plug Port Plug AIR TANK Air Compressor Ground (Black) Drain Cock Power (Red or Black) Ground (Black) Hornblasters, Inc. Phone: +1 (813) 783-8058 4532 W. Kennedy Blvd #233 Fax: +1 (813) 783-2407 Tampa, FL 33609-2042 email: support@hornblasters.com...

This manual is also suitable for:

Nathan airchine k3 train horn kit