2.1
Chassis cover
2.1.1
Removing the rear cover
1.
Loosen the two thumbscrews on the rear panel to release the rear cover from the
chassis. There is no need to remove the thumbscrews, just loosen them.
2.
Firmly hold the cover and slide it towards the rear panel for about half an inch until it is
disengaged from the chassis.
3.
Lift the cover from the chassis.
The chassis is covered with a layer of film. Before starting up the system, remove the film to
avoid overheating.
2-2
Screws
Chapter 2: Hardware Information