Taktavan 1K User Manual page 11

BUTTONS
UP
DOWN
ENTER
DOWN+ENTER
UP+DOWN
UP+ENTER
Display
NORMAL LED
BATT. LED
ALARM mode LED
FAULT mode LED
.Page up
Page down
Confirm the selection
When UPS is under battery, you can put this button for Mute.
Turn on UPS system:
By pressing the Switches the UPS system is turned on.
When mains power is normal, the UPS system switches to Standby mode
by pressing the Switches. It is then switched to Bypass and the inverter is
off. At this moment, the output sockets are supplied with voltage via the
bypass if the mains power is available.
When set UPS parameter, which can be set only under bypass and
standby mode. Please contact with your supplier when you need to set
parameter
LED lighting under Line mode means UPS working normally.
And LED also lighting on bypass mode with beep1time every
2mins.
LED lighting under battery mode means UPS working
normally
The BAT mode LED lights up when the mains power has
failed and the inverter is being powered by the batteries.
The FAULT mode LED lights up and an acoustic warning
signal is issued continuously when the UPS system is in fault
condition.
Function
Function
１０