Zte ZXMBW TP25I User Manual page 31

The network login procedure is as follows:
1. Click Start > Program Files > ZTE WiMAX > TP25I to start
the DATA CARD program.
2. In the main window of the DATA CARD program, click
right-click
interface, and then select Connect to enter the network
login window, as shown in Figure 14.
If the main window is hidden, you can double-click
show it.
F 1 4 N
I G U R E E T W O R K
3. Enter the login account or select an account used in the
Account pull-down
password, and click Login. The program starts connecting
with the network.
After the connection succeeds, the main window of the DATA
CARD program displays "Status: Connected" as well as the
data volume and connection duration, as shown in Figure 15.
At the same time, the tray icon turns into
Confidential and Proprietary Information of ZTE CORPORATION
in the lower right corner of the Window
L
O G I N
list box,
Chapter 4 Data Card Usage
enter the corresponding
.
or
to
21