Table of Contents
Advertisement
System Requirements
Before installing the DATA CARD, make sure that the following
three conditions are met:
Your computer has an available PCMCIA slot.
The CPU main frequency is at least 1 GHz, the memory is at
least 256 MB, and the spare space of the hard disk is at least
100 MB.
The operating system is Windows XP.
Hardware Installation
Insert the DATA CARD into a vacant PCMCIA slot of your
computer.
The hardware installation procedure is as follows:
1. Press the locker of the PCMCIA slot of your computer, to
make the locker automatically bounce out. Then press it to
eject the PCMCIA slot protection panel.
2. Take out this panel, and make the pins of the DATA CARD
pointing at the PCMCIA slot of the computer, and then slowly
push the DATA CARD with appropriate force, as shown in
Figure 2.
F
2 I
I G U R E
N S E R T I N G A
3. After the DATA CARD and the PCMAIC slot normally join
together, you can hear a "tick", as shown in Figure 3.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 Installing and Uninstalling Data Card
D A T A C A R D
C
I N T O A
O M P U T E R
11
Advertisement
Table of Contents
