Alignment And Adjustment - Samsung DVD-V940K Training Manual

6. Alignment and Adjustments
6-1 VCR Adjustment
6-1-1 Reference
1) X-Point (Tracking center) adjustment, "Head switching adjustment" and "NVRAM option setting" can be adjusted with remote control.
2) When replacing the Main PCB Micom (IC601) and NVRAM (IC603 ; EEPROM) be sure to adjust the "Head switching adjustment" and
"NVRAM option setting".
3) When replacing the cylinder ass'y, be sure to adjust the "X-Point" and "Head switching adjustment".
4) How to adjust.
- Short the "TEST" Point on VCR MAIN PCB to set the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is performed automatically.
- When the adjustment is completed, be sure to turn the power off.
6-1-1(a) Location of adjustment button of remote control
X-Point (Tracking Center) Adjustment ;
NVRAM Option Setting ;
Head Switching Adjustment ;
Samsung Electronics
Fig. 6-1
STANDBY/ON OPEN/CLOSE
KARAOKE SEARCH
KARAOKE
VOLUME PROG / TRK
OK
6-1