Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Gewiss Manuals
  4. Security Sensors
  5. GW 90787
  6. Technical manual

Gewiss GW 90787 Technical Manual

Knx outdoor movement detector
Hide thumbs

Advertisement

Quick Links

Download this manual
KNX outdoor movement detector
GW 90787
Technical Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the GW 90787 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Gewiss GW 90787

Summary of Contents for Gewiss GW 90787

  • Page 1 KNX outdoor movement detector GW 90787 Technical Manual...

  • Page 2: Communication Objects

    - General 1/1/1 Switch object Switch object In the following the device will be referred to as the movement detector. The movement block will only switch off when there is no Movement Switch more movement in front of the device - in other words, Detector Actuator independently of the brightness.
  • Page 3 Block configuration General Parameter Setting Up to five movement blocks are available. In the default Safety pause via status feedback Disabled setting, block 1 is enabled. object For OFF telegram For ON and OFF telegram Parameter Safety pause (1 - 20) seconds 1-20, preset: 2 Block configuration Parameter...
  • Page 4 Communication objects You can select the following communication objects: Move Movement Sensor detection Block X, general movement sensors: Master Trigger Function Object name Type Prio Flags Behaviour Block X Range 1 byte Receive Brightness obj. Brightness Brightness sensor evaluation Parameter Always- dark obj.
  • Page 5 telegram can be transmitted. If the parametrised brightness Block X, general movement threshold is exceeded, an OFF telegram can be transmitted. sensors sector X Inverted transmission can also be set. Parameter Setting Sensitivity High Medium Too bright Brightness Brightness threshold Too dark Range adjustable Via parameters...

  • Page 6: Monitoring Mode

    Parameter telegram at the start of movement and transmits an OFF telegram when the movement time (staircase timer) has Block X, general brightness expired. Parameter Setting Movement detection is brightness-dependent Slave mode independent of brightness In slave mode the default setting is that ON telegrams are Brightness threshold adjustable via Parameters sent cyclically when a movement is detected.
  • Page 7 Communication objects Slave mode: – "Do not send" (is permanent setting in the background of You can select the following communication objects: the application software, is not displayed in the parameters) Block X, general: Monitoring mode: Function Object name Type Prio Flags Behaviour –...
  • Page 8 Parameter which depend on other functions. Depending on the parameter setting, some functions or objects may or Note: may not be displayed in the ETS. The parameter settings include various functions Block X general telegrams output which depend on other functions. Depending on the switching/value object X parameter setting, some functions or objects may or Parameter...
  • Page 9 set. Once the time set on the staircase timer has elapsed, a Parameter restart takes place with "Minimum time factor". Operating mode: Normal operation Note: Communication objects The parameter settings include various functions Operating mode: Normal operation which depend on other functions. Depending on the parameter setting, some functions or objects may or You can select the following communication objects: may not be displayed in the ETS.
  • Page 10 parameter setting, some functions or objects may or Parameter may not be displayed in the ETS. Operating mode: Slave mode Block X, general times Block X, general times Parameter Setting Parameter Setting Master triggering is (brightness- Enabled Cyclic interval during movement dependent) Disabled Time base...
  • Page 11 Parameter Block X, general times: Block X, general Function Object name Type Prio Flags Behaviour Parameter Setting Block X Time factor, 1 byte Receive staircase timer Disable function Disabled Enabled Block X, general movement sensors: Block X, general - disable function Function Object name Type...
  • Page 12 – Master retriggers staircase timer upon movement detection or trigger, if previously switched on – Master switches off when staircase timer elapses – Cycle time slave maximum staircase timer / 2 GEWISS - MATERIALE ELETTRICO +39 035 946 111 sat@gewiss.com +39 035 946 260 8.30 - 12.30 / 14.00 - 18.00...