ZappBug Room Owner's Manual page 12

Use & Operation (continued)
10. Insert Items & Thermometer Probes
The ZappBug Room is a highly versatile heat treatment chamber. Place the items
you are heat treating into the room. Use the included foam blocks to raise furniture
above the floor of the Room for circulation. Fluff all items where possible and avoid
stacking items in piles. Keep all contents 4 inches (12cm) from walls.
Third party items such as shelving and clothing racks may be used to facilitate
the heat treatment of clothing and other items. Appropriate shelving and racks
should be available at your local hardware store.
Place the three wireless thermometer probes inside deepest (most insulated)
locations in items being treated.
Hint: Always open luggage and "fluff" items to ensure air circulation.
Note:
Think of this process the same way you would think of drying items in the sun.
If items are densely packed, they take longer to dry. Better air circulation will heat
your items faster and ensure bed bug killing temperatures. Always use included
thermometer to ensure that temperatures reach the lethal 120
11. Zip The Room Closed
©2014-2016 ZappBug. All rights reserved. Product specifications subject to change.
F (49 C). See step 10.
o o
12