Hardware - X10 WM100 Product Manual

Hardware

The hardware is simple and flexible. Normally, HUBs require the user to hardwire them
directly into the WiFi router, forcing the user to put the HUB in a location they may not
want it. This unit uses WiFi to connect and communicate with your router, allowing you
to place the X10 HUB anywhere within range of your router.
The hardware does currently have a memory limitation of 32 different addresses.
However, unlike traditional transceivers, this unit can control all of the 256 different
possible codes. In addition, this WiFi Module can also be used to detect what X10
signals are being seen on the electrical line by the WM100. This history can be found in
Setup > X10 WiFi history and settings.
Hardware 3 Model WM100