App - Scenes - X10 WM100 Product Manual

App – Scenes
o Scenes – Scenes allows the user to do a string of more complex commands with the
touch of one button. A scene is something like a "wake up" command, or a "leave
house" command that may turn on or off specific X10 devices across your whole home.
o Add Scene





App - Scenes

To start adding a Scene, go to the "Scenes Tabs" and select
"Add Scene".
Give the Scene a name, then select the "Save" button in the
upper right.
You can now enter configuration for the scene to add devices and
delays. Hit the configuration button to the far right of the device name.
You will now see an "Add Device" button in the lower left.
Select it to begin adding devices.
Much like adding devices to a Room, a list of
all your devices will show up.
Hit the circle to add a device. The device will
not disappear from the list. You can select it
as many times as you might want it in the
scene (for example, you may want it to turn
on then turn off 20 mins later. You would
need the device in the scene twice to do this).
The easiest way to setup a complex scene
may be to add one device at a time.
Do this to as many devices as you would like
in the scene. When finished, hit the "back"
button in the upper left.
14 Model WM100