Demonstrating Features; Resetting The Detector - Radio Shack 22-1670 Owner's Manual

22-1670.fm Page 18 Friday, August 6, 1999 10:17 AM
Notes:
• Messages are numbered from 1 to 64, but 6 mes-
sages are not currently used.
• You must turn on Safety Warning System detection
and Safety Warning System transmitters must be in
use to receive Safety Warning System alerts. See
"Turning On Safety Warning System and VG-2
Detection" on Page 15.

DEMONSTRATING FEATURES

To demonstrate alerts, with the detector off, hold down
and . The detector displays
AUD CTY
demonstrates all audio alerts and displays the corre-
sponding band. It then demonstrates the signal strength
meter, a VG-2 alert, and three sample SWS messages.
To end the tutorial, press
To see all 58 SWS messages, press
ple message. The detector displays
SWS
current message number. To see this message, press
. To advance to the next message, press
AUD
do not press a button within 3 seconds, the detector
resumes its demonstration.

RESETTING THE DETECTOR

To reset the detector to its defaults, with the detector
off, hold down , then press both
AUD
detector displays RESET
18
TUTORIAL , then
.
P/V
during a sam-
CTY
MSG and the
. If you
CTY
and
CTY P/V
and beeps twice.
. The