Audio Modes; Turning On Safety Warning System And Vg-2 Detection - Radio Shack 22-1670 Owner's Manual

22-1670.fm Page 15 Friday, August 6, 1999 10:17 AM

AUDIO MODES

While the detector is sounding a radar or Safety Warn-
ing System alert, you can press
silence it. The detector returns to normal operation after
the radar signal stops.
You can change the alert pattern to sound several X-,
K-, or Ka-tones followed by muted clicking by pressing
when no alert is sounding. The detector briefly dis-
AUD
plays . The clicking becomes more rapid as
AUTOMUTE
the radar signal strength increases. Press
return to normal operation. The detector briefly displays
AUTO off .
Note: Laser alerts are not affected by the audio modes.
TURNING ON SAFETY WARNING
SYSTEM AND VG-2 DETECTION
You can turn the Safety Warning System and VG-2
detection on and off to suit your needs. Follow these
steps to change these features.
1. With the detector off, press and hold
press . The detector beeps and briefly displays
P/V
FEATURES . Then the detector either displays
or flashes
on SWS off
2. Press to change the SWS setting.
AUD
to temporarily
AUD
again to
AUD
, then
CTY
SWS
.
15