Yamaha PDM-1 Service Manual page 29

INPUT Equipment
4 525i
Gray Scale
Pattern
Black 2 %
Black 0 %
525p
Gray Scale
Pattern
HD
(720i or 1080i)
Gray Scale
Pattern
5 625i
Gray Scale
Pattern
Black 2 %
Black 0 %
Setting Alignment menu
Picture: PANEL W/B
Normal All cut off 1) Set white balance to Cool .
Aspect:
16:9
Picture: PANEL W/B
Normal All cut off 1) Set white balance to Cool .
Aspect:
16:9
** Adjust at the dark room.
2) Adjust All cut off to start some pixels emission
at black 2% area and no emission at black 0% area.
3) Write down all cut off data.
4) Set white balance to Nornal .
5) Adjust All cut off to set same data of Cool mode.
6) Set white balance to warm .
7) Adjust All cut off to set same data of Cool mode.
8) Change to 525p signal.
9) Copy 525i All cut off data to 525p mode.
8) Change to HD signal.
9) Copy 525i All cut off data to HD mode.
** Adjust at the dark room.
2) Adjust All cut off to start some pixels emission
at black 2% area and no emission at black 0% area.
3) Write down all cut off data.
4) Set white balance to Nornal .
5) Adjust All cut off to set same data of Cool mode.
6) Set white balance to warm .
7) Adjust All cut off to set same data of Cool mode.
29
Procedure
PDM-1U / G / R /