Subscribe to Our Youtube Channel
Related Manuals for LUDLUM 43-2-2
Summary of Contents for LUDLUM 43-2-2
- Page 1 LUDLUM MODEL 43-2-2 ALPHA/BETA SCINTILLATOR August 2015 Serial Number 156003 and Succeeding Serial Numbers...
- Page 3 LUDLUM MODEL 43-2-2 ALPHA/BETA SCINTILLATOR August 2015 Serial Number 156003 and Succeeding Serial Numbers...
- Page 5 RETURN OF GOODS TO MANUFACTURER If equipment needs to be returned to Ludlum Measurements, Inc. for repair or calibration, please send to the address below. All shipments should include documentation containing return shipping address, customer name, telephone number, description of service requested, and all other necessary information.
-
Page 6: Table Of Contents
Model 43-2-2 Alpha/Beta Scintillator Table of Contents General Specifications Preliminary Instruction Operating Procedures Parts List Drawings and Diagrams Ludlum Measurements, Inc. August 2015... -
Page 7: General
(1.5 in.) diameter magnetically shielded photomultiplier tube and is housed in a 0.157 cm (0.062 in.) aluminum housing with a 0.8 mg/cm metallized polyester window. The Model 43-2-2 will operate with the Ludlum Model 2224 scaler/ratemeter, Model 2225 scaler/ratemeter, and the Model 2929 sample counter. Ludlum Measurements, Inc. -
Page 8: Specifications
Model 43-2-2 Alpha/Beta Scintillator Specifications alpha beta survey Indicated Use: two layers of 0.8 mg/cm Window: active and open are 9.7 cm Window Area: 25% for Pu; 20% for Sr/Y; 5% Efficiency (4π geometry): alpha is less than 3 cpm; beta is typically 50 cpm... - Page 9 Every returned instrument must be accompanied by an Instrument Return Form, which can be downloaded from the Ludlum website at www.ludlums.com. Find the form by clicking the “Support” tab and selecting “Repair and Calibration” from the drop-down menu. Then choose the appropriate Repair and Calibration division where you will find a link to the form.
-
Page 10: Operating Procedures
Model 43-2-2 Alpha/Beta Scintillator Operating Procedures ONNECTING TO AN NSTRUMENT Connect one end of the cable provided to the detector by firmly pushing the connector together while twisting clockwise one quarter of a turn until latched. Repeat the process in the same manner with the other end of the cable and the instrument. -
Page 11: Parts List
Model 43-2-2 Alpha/Beta Scintillator Parts List Model 43-2-2 Alpha Scintillator Reference Description Part Number UNIT Completely Assembled Model 43-2-2 Beta/Alpha Scintillator 47-2003 DETECTOR BODY 2002-320 1 EA END CAP 7002-029-02 1 EA TUBE SHIELD 40-4006 1 EA 1.5 INCH TUBE SOCKET BOARD... -
Page 12: Drawings And Diagrams
Model 43-2-2 Alpha/Beta Scintillator Drawings and Diagrams Assembly View, Drawing 2 x 584 1.5 inch Tube Socket Board, Drawing 2 x 317 1.5 inch Tube Socket Component Outlines, Drawing 2 x 318 Ludlum Measurements, Inc. Page 6 August 2015... - Page 13 Model 43-2-2 Alpha/Beta Scintillator Ludlum Measurements, Inc. Page 7 August 2015...
- Page 14 Model 43-2-2 Alpha/Beta Scintillator Ludlum Measurements, Inc. Page 8 August 2015...
- Page 15 Model 43-2-2 Alpha/Beta Scintillator Ludlum Measurements, Inc. Page 9 August 2015...
Need help?
Do you have a question about the 43-2-2 and is the answer not in the manual?
Questions and answers