Mounting The Base Unit On A Wall; Standard Wall Plate Mounting - Uniden TCX860 Manual

UP743.book Page 12 Monday, November 29, 2004 9:28 AM

Mounting the Base Unit on a Wall

!

Standard wall plate mounting

This phone can be mounted on any standard wall plate.
1) Snap the wall mount adapter into the notches
DO NOT use an AC
on the base top.
outlet controlled by a
wall switch.
2) Plug the AC adapter into the DC IN 9V jack.
3) Wrap the AC adapter cord inside the molded
wiring channel as shown.
4) Plug the AC adapter into a standard 120V AC
wall outlet.
5) Plug the telephone line cord into the TEL LINE
jack.
Wrap the cord inside the molded wiring channel
as shown.
6) Plug the telephone line cord into the telephone
outlet.
7) Raise the antenna to a vertical position.
8) Align the mounting slots on the base with the
mounting posts on the wall. Then push in and
down until the phone is firmly seated.
w w w . u n i d e n . c o m
M o u n t in g t h e B a s e U ni t on a W a l l [ 1 2 ]