Table of Contents
Advertisement
32-3008.fm Page 13 Thursday, April 6, 2000 4:03 PM
The echo is applied to the sound before all
the inputs are mixed.
Set
to
to turn on the echo effect
ECHO
MIC
for the microphones and the
Set
to
to turn on the echo effect
ECHO
MUSIC
for Channels 1, 2, 3, and 4 outputs.
To turn off the echo effect, set
Adjusting the Echo Delay, Repeat,
and Volume
The
control lets you adjust the
ECHO DELAY
time delay for an echo. Set
for a minimum time delay and to
maximum time delay.
The
control lets you control
ECHO REPEAT
the length of time a tone is repeated (rever-
beration). Set
ECHO REPEAT
longest time repeat and to
The
control lets you adjust the
ECHO LEVEL
output level of the echo effect. Rotate
toward
to increase the echo level
LEVEL
10
and toward
0
to decrease it.
USING SOUND EFFECT
DEVICES
Playing the Signal from the Sound
Effect Device
To play signals from a device connected to
the
jacks, set the
EFFECT
. When you are not using the connected
ON
inputs, set the
RECEIVE
Rotate
to adjust the volume of the
RECEIVE
input connected to the
EFFECT
changing the sound effect device's volume.
Rotate
toward
RECEIVE
volume and toward
to decrease it.
0
input.
AUX LINE
to
.
ECHO
OFF
to
ECHO DELAY
0
for a
10
to
for the
10
for the shortest.
0
ECHO
switch to
RECEIVE
switch to
.
OFF
jacks without
to increase the
10
Operation
Playing Input Signals through the
Sound Effect Device
You can play inputs selected by the channel
selectors,
, or
DJ MIC
sound effect devices connected to the mixer,
such as an echo reverb or a digital sampler
processor, and control playback through the
mixer. To play selected inputs through the
sound effect device, set
selected input.
The
control lets you adjust the volume
SEND
of the selected sound to the sound effect de-
vice without changing the device's volume.
Rotate
toward
SEND
10
ume and toward
to decrease it.
0
through other
AUX
to the
SEND ASSIGN
to increase the vol-
13
Hide quick links:
Advertisement
Table of Contents
