Using The Seven Band Equalizer; Using Echo Effects; Adjust Echo Delay, Repeat, And Level - Radio Shack 3200026 User Manual

Using the Seven Band Equalizer

The seven band equalizer controls, LEFT CHANNEL and RIGHT CHANNEL,
further tailor the frequency for CHANNELS 1–4 to match your acoustic
surroundings or to suit your personal preference.
1. To activate the equalizer, slide EQ ON/OFF to ON.
2. Set the LEFT CHANNEL and RIGHT CHANNEL controls for a selected
frequency to +12dB to boost, or toward -12dB to cut the frequency's sound.
To provide smooth frequency control, the equalizer's controls must overlap
slightly. Thus, the 1K control has a light effect on the range of frequencies
covered by the 400Hz and 2.4K controls.

Using ECHO Effects

The mixer provides an echo effect and lets you adjust each delay, number of
echo repeats, and the echo's volume. The echo is applied to the sound after all
of the inputs are mixed.
Slide ECHO ON/OFF to ON to turn on the echo effect. To turn it off, slide
ECHO ON/OFF to OFF.

Adjust Echo Delay, Repeat, and Level

To adjust the time interval between echoes, rotate ECHO DELAY. Set ECHO
DELAY to 0 for minimum delay, and to 10 for maximum time delay.
To adjust the length of time a tone is repeated (reverberation), rotate ECHO
REPEAT. Set ECHO REPEAT to 10 for the longest reverberation and to 0 for
the shortest.
To adjust the echo output level, rotate ECHO LEVEL. Rotate ECHO LEVEL
toward 10 to increase the echo level, and toward 0 to decrease it.
ECHO ON/OFF
ECHO REPEAT
ECHO DELAY
ECHO LEVEL
19