Canon PIXMA MP800R Quick Start Manual page 33

Hide thumbs Also See for PIXMA MP800R:

Table of Contents

Prepare a replacement tank.

(1) Remove the new ink tank from its packaging,

then pull the orange tape (A) toward the arrow

so that the protective film does not remain on

the air hole (C). Then remove the film

completely (B).

(2) Remove the orange protective cap (D) from

the bottom of the ink tank and discard it.

Carefully hold the protective cap when

removing it to prevent the ink from staining

your fingers.

Discard the cap once it is removed.

Install the ink tank.

(1) Install the ink tank into the Print Head.

(2) Press on the

ink tank snaps firmly into place.

(3) Ensure that the ink tank clicks into place and

then its lamp lights red (A).

Maintenance

mark on the ink tank until the

(B)

(D)

(A)

(C)

Table of Contents