Download Print this page

Limited Warranty - Radio Shack XMODS 60-440 Installation

Metal bearings upgrade kit

Advertisement

Reassemble the motor and the motor holder. Route
16
the wire through the strain relief hook on the left
side.
Remove two screws each from the tie rod holder
17
and the tie rod, then remove one screw to detach
the mud guard.
Tie rod holder
Tie rod
Mud guard
Remove the three screws on front gear case to
18
detach it.
Front gear case screws
Remove the front center
19
gear and the center shaft
and take out the small
bearing. Tweezers may be
helpful for this step.

Limited Warranty

This product is warranted by
against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from
authorized
franchisees and dealers. EXCEPT AS PROVIDED HEREIN,
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN,
SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR
PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA,
PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the
provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and
products, and products on which a refund is made, become the property of
and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance,
alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a
damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Customer Relations
300 RadioShack Circle, Fort Worth, TX 76102
©2008 RadioShack Corporation. All Rights Reserved.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
www.xmodsRC.com
Reattach the center gear to the center shaft. Lightly
20
press and rotate the center gear so the flat side of
the center shaft and the center gear mesh.
Restore the center shaft with center gear to their
21
original positions, and rotate the center gear so the
rear center gear meshes with the shaft.
Take out the front differential gear unit and replace
22
the bearings on both sides of the gear.
Restore the front differential gear unit as shown in
23
the illustration.
Align the front arm shafts to the proper holes and
24
reassemble the front gear case.
Reassemble the tie rod and tie rod holder, and then
25
the mud guard.
MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY
sales receipt as proof of purchase date to any
. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts
Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
store.
will, at its option, unless otherwise
12/99
company-owned stores and
60-440
07A08
INS-3362-US-08
Printed in China

Advertisement

loading

This manual is also suitable for:

Xmods street custom rc60-440