Bissell CLEANVIEW 1989 SERIES User Manual page 6

Operating The Product
WARNING
Before using your vacuum, make sure that the dirt container is in locked position and
that all fi lters, both pre and post-fi lters are in place. DO NOT operate your vacuum without
these fi lters.
1
Pull the cord out and plug into socket.
3
Floor tool can be used on carpeted
and hard floor surfaces. Use on hard
floor with the pedal in "up" position to
lower brush bar.
WARNING
Please ensure pedal is in correct position before vacuuming your fl oor surfaces. Use the "up"
position for hard fl oor surfaces (Figure 3), and "down" position for vacuuming carpeted
fl oor. (Figure 4). Failure to do so may result in damage to your fl oor surface.
6
www.BISSELL.ca
2
Press on-off button to turn on vacuum.
4
For carpeted floor press the pedal
down to retract the brush bar.