Table of Contents
Advertisement
2910-VSG Vector Signal Generator Quick Start Guide
7. Select the Apply button.
8. Select Close to close the dialog.
NOTE:
Make sure that the combination of 2910 IP address and subnet mask is
within the range of directly addressable IP addresses of the computer.
For example:
Computer IP address: 192.168.1.50
Computer subnet mask: 255.255.255.0
2910 IP address: 192.168.1.51
2910 subnet mask: 255.255.255.0
DHCP address assignment
If a DHCP server is on the LAN, you can choose to have a DHCP automatically assign an IP address.
1. From the 2910, select Menu > Utilities > Ethernet Settings.
2. Select the IP Address tab.
3. Select Obtain an IP address via DHCP.
4. Select the Apply button.
5. This configures the signal generator as a DHCP client. In DHCP mode, the signal generator
requests a new IP address from the DHCP server. The assigned address appears in the IP
Address field.
6. Select Close to close the dialog.
Direct connection configuration
Assigning a static IP address is the preferred method of assigning an IP address for a configuration
that has the 2910 directly connected to the computer. Optionally, you can use the DHCP method,
which results in a Link Local Address (LLA) being assigned to the 2910.
Static IP address assignment
1. From the 2910, select Menu > Utilities > Ethernet Settings.
2910-903-01 Rev. A / February 2006
14
Advertisement
Table of Contents
