Panasonic AG-HMC150P Quick Start Manual page 3

Put the SD Chip into the bay/slot at the rear of the camera
To remove/swap the card:
1. turn off the camera.
2. Open the card door.
3. Push lightly on the card to 'pop' it out.
4. Remove the card by gently pulling on the piece now sticking out.
NOTE
Do not open the card door when the camera is on.
If you need to swap cards:
1. Stop recording.
2. Turn off the camera.
3. Swap cards.
Turn on the camera.
Camera Off Position.
The SD Chip bay/slot is located at
the rear of the camera.
Open, by pushing the door to the
left, then gently pulling down on
the door.
Push your card into the slot, then
close the door, in the reverse order
that you opened the door.
Camera On Position.
C