Advertisement
Setting Up the Keyboard or Wireless Desktop
1.
Make sure that your computer is turned off.
2.
Connecting the Receiver's Keyboard Cable:
(a) When connecting to an IBM AT keyboard port, use the 5-pin DIN connector already attached to the
keyboard cable.
(b)
When connecting to a PS/2 -style, 6-pin DIN keyboard port, remove the AT adapter.
(c) Connect the receiver's purple keyboard cable to the computer's keyboard port.
3.
Place the receiver eight inches (20 centimeters) from any
electromechanical device.
Installing the Keyboard
Software-iKeyWorksOffice
Before you can take advantage of the many features your keyboard offers, you
must install the driver. The driver is in the installation diskette that came
packaged with your mouse and keyboard
Windows 95/98/Me/2000/NT4.0 installation
Insert the installation diskette into your floppy disk drive.
Click the Start button and then click Run.
In the Run dialog window, type A:\setup, where "A" is the letter of your floppy disk drive.
4
Advertisement
